PowerVu

Post Reply
sumzy
Posts: 9
Joined: Mon Oct 09, 2017 1:46 am

PowerVu

Post by sumzy » Tue Feb 20, 2018 4:17 pm

I saw few topics discussing this and did not see a conclusion. Does Meeloplus One Pro support PowerVu ?

User avatar
admina
网站管理员
Posts: 196
Joined: Mon May 22, 2017 10:38 am

Re: PowerVu

Post by admina » Mon Feb 26, 2018 1:59 am

POWERVU is not supported currently .
ME ELO+ Team

tiaggao
Posts: 3
Joined: Sat Apr 07, 2018 1:53 am

Re: PowerVu

Post by tiaggao » Sat Apr 07, 2018 1:58 am

Fix: The Meelo + OnePro receiver works fine with Powervu, configuring the channels to work in StreamRelay.
Then go to oscam through the computer browser, go into settings later in StreamRelay and activate the relay mode in (1)

User avatar
admina
网站管理员
Posts: 196
Joined: Mon May 22, 2017 10:38 am

Re: PowerVu

Post by admina » Sat Apr 07, 2018 7:00 am

You can share photos
ME ELO+ Team

tiaggao
Posts: 3
Joined: Sat Apr 07, 2018 1:53 am

Re: PowerVu

Post by tiaggao » Fri Apr 27, 2018 7:07 pm

Sorry for the delay in posting the images.

Image

Image
Image
Image
Image
Image

Just open DreamboxEdit (or any other of your choice), open your channel list, get all the necessary restrictions, right-click on IPTV and go to the other Streaming services and make the configuration as it is in the images. Save, resubmit your list to your receiver and you're done.
Remember that depending on the satellite you are going to use, maybe oscam does not open all, in my case that oscam of the image is opening the satellites 58w, 65w, 70w and 75w in the C band.
Good luck

IPTVKid
Posts: 8
Joined: Tue May 08, 2018 1:33 am

Re: PowerVu

Post by IPTVKid » Tue May 08, 2018 7:12 pm

I have tried this but I can't connect to OSCAM by computer browser
Testing: MEELO+ ONE PRO
There is no way to peace, Peace is the way: Author.....

IPTVKid
Posts: 8
Joined: Tue May 08, 2018 1:33 am

Re: PowerVu

Post by IPTVKid » Sun May 27, 2018 2:50 am

tiaggao wrote:
Fri Apr 27, 2018 7:07 pm
Sorry for the delay in posting the images.

Image

Image
Image
Image
Image
Image

Just open DreamboxEdit (or any other of your choice), open your channel list, get all the necessary restrictions, right-click on IPTV and go to the other Streaming services and make the configuration as it is in the images. Save, resubmit your list to your receiver and you're done.
Remember that depending on the satellite you are going to use, maybe oscam does not open all, in my case that oscam of the image is opening the satellites 58w, 65w, 70w and 75w in the C band.
Good luck
Hello, my friend can you help me upgrading the oscam emu to the r11402? I have tried everything and still with r11380 thanks in advance IPTVKid
Testing: MEELO+ ONE PRO
There is no way to peace, Peace is the way: Author.....

Post Reply